UTX
Overv=
iew
Upgrading
your version of UTX Canada from version 1.0 (or version 1.1) to version 1.1=
b is
a simple 3 step process:
- Download the compressed p=
atch
contents (UtxCanV11b.zip).
- Unzip the patch contents =
(2
files) to the folder location of your choice.
- Run the patch preparation
application that were downloaded and start the patch process.
A patch preparation step has been provided that will ensure th=
at
your UTX
Step =
1:
Downloading The Patch
Click
on the link below and save the patch to your hard disk (any location). The
patch is roughly 50mb in size.
Download
UtxCanV11b.zip Step =
2:
Extract The Downloaded File Contents To Your Hard
Drive The
patch files are stored in a compressed Zip file format. There are two files
that should be extracted to your hard drive from the file that is downloade=
d. Please
do not execute the UTXCANV11b.EXE patch application directly after download=
. If
you try to run the application, it will fail. This was done for security
measures. Step =
3: Begin
The Patch Preparation Process From
the location that you extracted the compressed files to, execute the
UTXPATCH.EXE application. First, the application will try and locate the FSX
install location by reading the windows registry. If successful, you will s=
ee a
window similar to below and the “Patch Preparation” button will=
be
enabled (clickable). If FSX cannot be located using the windows registry entry for FS=
X,
then you will need to locate it yourself using the “Change FSX
Location” button. After
pressing the “Change FSX Location” button, you will need to bro=
wse
to the FSX install folder (the folder containing FSX.EXE). The “Patch Preparation”
button will only be enabled if FSX has been successfully found with a valid=
UTX
Cli=
ck the
“Patch Preparation” button to start the patch preparation
process. This is not the actual process that will
upgrade you to version 1.1.
Instead, this button starts the process that gets your environment r=
eady
for the patch. You=
will be
notified when the patch preparation process is complete (quick process). If
successful, the “Launch Patch Application” button will become
active. This indicates that t=
he
actual patch application (U=
txCanV11b.exe
) has been unlocked and is=
ready
to use. You can start t=
he
actual patch process now by pressing the “Launch Patch Application=
221;
button. Or you can run the pr=
ocess
later on by executing the UtxCanV11b.exe application directly from your hard
drive. Whe=
n you
start the patch application, you will see the window below: Fol=
low the
patch instructions to install the patch. Your version of UTX Canada will no=
t be
upgraded until the patch application has completed. After the patch process=
is
complete, your version of UTX Canada will be upgraded to Version 1.1b. You can always find ou=
t the
version of UTX Canada that is currently installed, by running the UTX setup
tool that was installed when you purchased the software. If =
you need
assistance with the patch process, please visit our support forum at: http://www.simforums.com/forums/forum_topics.asp?FID=3D19
=
=
Removing The Patch Files Aft=
er you
successfully install the UTX Canada patch, you can remove the following fil=
es
from your hard drive if desired, because they are no longer needed. =
226;
FSXPATCH.EXE =
226;
UTXCANV11b.EXE =
226;
UtxCanV11b.zip
![](3D"patchInstructionsCanV11_files/image002.gif")
![](3D"patchInstructionsCanV11_files/image004.gif")